FEATURES

19pcs x 40W RGBW LED, 850W, 6000K

OSRAM 40W LED lamp beads RGBW 4 in 1

White CT Emulation 2500-8000K

Total output up to 50000 hours

Built-in rich effect program

0-100% Linear Dimming Modes

2 color switching modes (RGBW/CMY)

Versatile, 5 operating modes: wash, beam, FX (Kaleido effects), graphics, special effects

4-60°, 37500lux@5m ,minimum angle and even light spread

Rotating front lens for countless vortex effects & small waist effect, for aerial or"kaleidoscopic"projection use

Individual LED control for each parameter can be rotated in both directions at fast/slow speed

Invisible front grid

Beam edge softening control (in wash mode)

Exclusive parallel beam consisting of an array of individually controllable micro-beams

Enhanced electronic engine for dynamic beam pattern design, with digital accuracy and repeatability

Art-Net / RDM

Arkaos Kling-Net protocol already included in the firmware

RGB auto-tuning to lamp CT Emulation

Tungsten Lamp Emulation

SPECIFICATIONS

MODEL NO.

BLM1940ZR

PHYSICAL

Length: 690 mm 

Width: 560 mm

Height: 49 mm head straight up

Net Weight: 20 kg

Carton Packing (1 in 1):

Size: 69×56×49cm

Gross weight: 28kg

Flightcase Packing (2in1):

Size: 120×84×47cm

Gross weight: 96kg

DYNAMIC EFFECTS

5 operating modes: wash, beam, FX (Kaleido effects), graphics, special effects

Bi-directional Rotating Front Lens

Digital Wash-Beam Framing effect

Beam edge softening control (in Wash mode)

Pixel Patterning Macros with enhanced control

Adjustable speed stop/strobe effect, with instantaneous blackout

Dedicated channel for color temperature setting

White CT Emulation 2500-8000K

RGBW auto-tuning to lamp CT Emulation

Tungsten Lamp Emulation

Adjustable speed stop/strobe effect, with instantaneous blackout

Slow Strobe: 1 flash/sec

Fast Strobe: 25 flash/sec

0-100% Linear Dimming Modes

Zoom range: 4-60°, 37500lux@5m ,minimum angle

Electronic Zoom Range

Movement by means of two stepper motors, controlled by microprocessor

Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit

Pan: 540°

Tilt:  270°

LIGHT SOURCE

Maximum power：850W

Light Source : 19pcs RGBW LEDs driven at 40 Watt

Type: OSRAM OSTAR - Stage II LE RTDUW S2WN

Color Temperature: 6,000 K

Life: 50,000 hours

CONTROL AND PROGRAMMING

DMX protocol signal: USITT DMX 512

DMX channels: 22/36/79/98 CH

DMX signal interface: 3-pin network port input and output

Self-charging battery

Art-Net / RDM

Arkaos Kling-Net protocol already included in the firmware

Display: Graphic LCD backlit b/w Display 

Pan/Tilt Resolution: 16 bit

Dimmer Resolution: 16 bit

Movement control: vectorial

DMX signal connection: 3 and 5 pole XLR input & RJ45 and output

Software upload through DMX input

CONSTRUCTION

Color(s): Black

Boby: Aluminium structure with die-cast plastic cover

Two side handles for transportation

PAN and TILT lock for transport and maintenance

Housing: UV-resistant fiber-reinforced composite

Display: advanced & convenient full-color LCD touch button screen with RDM

ELECTRONICS

Long-life auto-charging buffer battery

Preset color and graphic effect macros

Function reset controllable from a central control unit

Menu-driven internal self-test function

Ethernet ready with RJ45 socket

Display: backlit black-and-white graphic LCD display

Electronic check-up of every single parameter with error alarm

DMX level monitoring on each channel

Automatic internal data transmission error diagnostics

Firmware upgrade even when the unit is not connected to the power supply

Firmware transfer from one light to another

SAFETY DEVICES

Automatic power safety derating in case of overheat of the LED board

Forced ventilation

WORKING POSITION

Working in any position

Hanging system: with fast-lock omega clamps (1/4 turn) on the base

INSTALLATION

Mounting points: Fold Clamp,2 pairs of 1/4-turn locks.

Orientation: Any

CONNECTIONS

AC power input: 1.5m integral cable without power plugDMX data in/out: 3-pin locking XLRFEATURES

19pcs x 40W RGBW LED, 850W, 6000K

OSRAM 40W LED lamp beads RGBW 4 in 1

White CT Emulation 2500-8000K

Total output up to 50000 hours

Built-in rich effect program

0-100% Linear Dimming Modes

2 color switching modes (RGBW/CMY)

Versatile, 5 operating modes: wash, beam, FX (Kaleido effects), graphics, special effects

4-60°, 37500lux@5m ,minimum angle and even light spread

Rotating front lens for countless vortex effects & small waist effect, for aerial or"kaleidoscopic"projection use

Individual LED control for each parameter can be rotated in both directions at fast/slow speed

Invisible front grid

Beam edge softening control (in wash mode)

Exclusive parallel beam consisting of an array of individually controllable micro-beams

Enhanced electronic engine for dynamic beam pattern design, with digital accuracy and repeatability

Art-Net / RDM

Arkaos Kling-Net protocol already included in the firmware

RGB auto-tuning to lamp CT Emulation

Tungsten Lamp Emulation

SPECIFICATIONS

MODEL NO.

BLM1940ZR

PHYSICAL

Length: 690 mm 

Width: 560 mm

Height: 49 mm head straight up

Net Weight: 20 kg

Carton Packing (1 in 1):

Size: 69×56×49cm

Gross weight: 28kg

Flightcase Packing (2in1):

Size: 120×84×47cm

Gross weight: 96kg

DYNAMIC EFFECTS

5 operating modes: wash, beam, FX (Kaleido effects), graphics, special effects

Bi-directional Rotating Front Lens

Digital Wash-Beam Framing effect

Beam edge softening control (in Wash mode)

Pixel Patterning Macros with enhanced control

Adjustable speed stop/strobe effect, with instantaneous blackout

Dedicated channel for color temperature setting

White CT Emulation 2500-8000K

RGBW auto-tuning to lamp CT Emulation

Tungsten Lamp Emulation

Adjustable speed stop/strobe effect, with instantaneous blackout

Slow Strobe: 1 flash/sec

Fast Strobe: 25 flash/sec

0-100% Linear Dimming Modes

Zoom range: 4-60°, 37500lux@5m ,minimum angle

Electronic Zoom Range

Movement by means of two stepper motors, controlled by microprocessor

Automatic repositioning of PAN and TILT after accidental movement not controlled by control unit

Pan: 540°

Tilt:  270°

LIGHT SOURCE

Maximum power：850W

Light Source : 19pcs RGBW LEDs driven at 40 Watt

Type: OSRAM OSTAR - Stage II LE RTDUW S2WN

Color Temperature: 6,000 K

Life: 50,000 hours

CONTROL AND PROGRAMMING

DMX protocol signal: USITT DMX 512

DMX channels: 22/36/79/98 CH

DMX signal interface: 3-pin network port input and output

Self-charging battery

Art-Net / RDM

Arkaos Kling-Net protocol already included in the firmware

Display: Graphic LCD backlit b/w Display 

Pan/Tilt Resolution: 16 bit

Dimmer Resolution: 16 bit

Movement control: vectorial

DMX signal connection: 3 and 5 pole XLR input & RJ45 and output

Software upload through DMX input

CONSTRUCTION

Color(s): Black

Boby: Aluminium structure with die-cast plastic cover

Two side handles for transportation

PAN and TILT lock for transport and maintenance

Housing: UV-resistant fiber-reinforced composite

Display: advanced & convenient full-color LCD touch button screen with RDM

ELECTRONICS

Long-life auto-charging buffer battery

Preset color and graphic effect macros

Function reset controllable from a central control unit

Menu-driven internal self-test function

Ethernet ready with RJ45 socket

Display: backlit black-and-white graphic LCD display

Electronic check-up of every single parameter with error alarm

DMX level monitoring on each channel

Automatic internal data transmission error diagnostics

Firmware upgrade even when the unit is not connected to the power supply

Firmware transfer from one light to another

SAFETY DEVICES

Automatic power safety derating in case of overheat of the LED board

Forced ventilation

WORKING POSITION

Working in any position

Hanging system: with fast-lock omega clamps (1/4 turn) on the base

INSTALLATION

Mounting points: Fold Clamp,2 pairs of 1/4-turn locks.

Orientation: Any

CONNECTIONS

AC power input: 1.5m integral cable without power plugDMX data in/out: 3-pin locking XLR

ELECTRICAL

AC power: 100-240 V, 50/60 Hz

Main fuse (100-120 V power):15 AT (slow blow) 

Main fuse (208-240Vpower): 10 AT (slow blow) 

TYPICAL POWER AND CURRENT

110 V, 60 Hz: 977 W, 9.0 A, PF 0.995

220 V, 60 Hz: 850 W, 3.9 A, PF 0.973

THERMAL

Cooling: Filtered forced air (temperature-regulated, low noise)

Maximum ambient temperature (Ta max.): 40° C

Maximum surface temperature, steady state, Ta=40° C: 160° C

Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 3340 / 3190 BTU/hr.

ELECTRICAL

AC power: 100-240 V, 50/60 Hz

Main fuse (100-120 V power):15 AT (slow blow) 

Main fuse (208-240Vpower): 10 AT (slow blow) 

TYPICAL POWER AND CURRENT

110 V, 60 Hz: 977 W, 9.0 A, PF 0.995

220 V, 60 Hz: 850 W, 3.9 A, PF 0.973

THERMAL

Cooling: Filtered forced air (temperature-regulated, low noise)

Maximum ambient temperature (Ta max.): 40° C

Maximum surface temperature, steady state, Ta=40° C: 160° C

Total heat dissipation (calculated, +/- 10% at 110 V, 60 Hz / 230 V, 50 Hz): 3340 / 3190 BTU/hr.